The Cometto Eco1000 transporters give industrial operators a compact, self-propelled way to move heavy loads inside plants, fabrication facilities, shipyards, ports, and project sites. Electronic steering, hydrostatic drive, modular axle configurations, and an integrated Power Pack Unit help crews position large components where conventional transport equipment may not have enough room to work.
The Eco1000 supports combined payloads up to 1,000 tons. Up to four Eco units can be connected when a load requires more capacity, a longer support area, or a wider arrangement.
Hale Trailer can help you compare configurations, review your load and route, and check current equipment availability.
Contact Hale Trailer to request pricing or discuss your application.

Cometto Eco1000
The Cometto Eco1000 is built for in-plant and industrial transport.
| Feature | Cometto Eco1000 |
| Maximum combined payload | Up to 1,000 tons |
| Available configurations | 2, 4, or 6 axle lines |
| Power Pack Unit | Integrated |
| Available power technologies | Diesel, hybrid, or electric |
| Combined operation | Up to four units |
| Common fit | Compact, recurring in-plant moves |
The Eco1000 is a compact choice for many routine plant moves. Its 2-, 4-, and 6-axle-line options give operators several platform lengths and capacity ranges to work with. Payload rating is one part of the decision. The load dimensions, center of gravity, support points, route width, turning space, floor capacity, duty cycle, and operating environment all affect the right setup.
Cometto Eco1000 Features and Configurations
The Cometto Eco1000 is an electronically steered, self-propelled modular vehicle developed for heavy in-plant transport. Its hydrostatic drive allows the unit to move progressively and precisely in multiple directions, which helps when crews must position a load in a restricted production area.

Eco1000 Axle-Line Options
Cometto offers the Eco1000 with 2, 4, or 6 axle lines. A shorter configuration may suit a compact load or a route with limited maneuvering room. A longer configuration provides more loading area and distributes the load across additional axle lines.
Examples include:
- A 4-axle Eco1000 with an 8,800 mm platform (approximately 28 ft. 10 in.) and a listed payload capacity of 174 tons
- A 6-axle Eco1000 with an overall length of 11,600 mm (approximately 38 ft. 1 in.) and a listed maximum payload of 264 tons
Actual capacity must be confirmed for the selected unit, load distribution, route, and operating conditions.
Compact Control for In-Plant Moves
Industrial facilities often leave little room for a long conventional combination to turn, reverse, and line up with a set-down point. The Eco1000 addresses that problem with self-propelled movement and electronic steering.
That control can help crews move components between:
- Fabrication and assembly bays
- Production and testing areas
- Indoor storage and outdoor staging areas
- Crane pickup and set-down points
- Coating, welding, and finishing stations
The ability to move in multiple directions also helps when a load must approach its final position at a specific angle.
Configured Around the Job
Some loads need more width, length, or stability than a standard platform provides. A proper equipment review should include:
- Total load weight
- Overall length, width, and height
- Center-of-gravity location
- Required support points
- Floor or ground-bearing capacity
- Doorway and overhead clearances
- Route width, grade, and surface
- Pickup and set-down method
- Minimum turning area
Give Hale Trailer a call with your load information and route details to begin a configuration review.
Integrated Power Pack Unit
The Power Pack Unit supplies power for propulsion, steering, and hydraulic functions. On the Eco1000, the PPU is integrated into the transporter. This design leaves more of the platform available for the load. The longer usable loading platform is a key advantage of the integrated PPU on the Eco1000.
A self-contained setup can also simplify recurring plant moves. Crews have fewer separate pieces to position before the transporter can begin work. That can be useful when the same equipment moves components between production areas several times per shift or follows a regular route through the facility.

Diesel, Hybrid, and Electric Power Options
Cometto offers diesel, hybrid, and electric Power Pack technologies across the Eco range.
Diesel Power
A diesel PPU may suit facilities with established fueling access, long operating periods, or work that takes place across indoor and outdoor areas. Ventilation, local exhaust requirements, expected operating hours, and fuel access should be reviewed before selecting this option.
Hybrid Power
A hybrid configuration may fit operations with changing duty cycles or routes that cross different work environments. Selection should account for shift length, move frequency, fuel access, charging access, and the amount of time the transporter spends under load.
Electric Power
An electric PPU may suit indoor plants where local exhaust, noise, or charging infrastructure affects equipment decisions. Buyers should consider expected travel distance, shift length, charging time, load frequency, operating temperature, and facility power availability.
Hale Trailer can help you compare available power systems for the Cometto Eco1000.
Combine Eco Units for Larger Loads
Up to four Eco units can be connected using interchangeable components. This allows operators to build an arrangement around loads that need greater capacity, a longer support area, or a wider transport platform.
Combined Eco configurations may help operators:
- Increase total system payload
- Support long components at several points
- Match the footprint of a wide structure
- Spread the load over a larger area
- Configure equipment around irregular load geometry
Connecting multiple units requires careful planning. Engineers must review load reactions, center of gravity, ground or floor pressure, route width, synchronization, grades, clearances, and set-down procedures.
Industrial Applications for the Eco1000
The Eco1000 is an excellent choice for industrial parts, steel and concrete elements, pipelines, offshore structures, ship components, turbines, generators, petrochemical structures, and nuclear-industry components.
Transformers, Turbines, and Generators
Power-generation equipment often combines high weight with concentrated support points. An Eco transporter can be configured around the component’s footprint and the route between assembly, testing, storage, and shipping areas.
Structural Steel and Concrete Elements
Bridge sections, beams, frames, precast elements, and large fabrications may need support across a long platform. The Eco1000’s available axle lengths give operators several ways to match the transporter to the load.
Offshore and Energy Structures
Drilling platform components, wind-energy structures, pipelines, and other energy-sector equipment can be wide, tall, or unevenly balanced. Electronic steering and modular combinations help crews plan support around the actual geometry.
Ship Components
Shipyards and marine fabricators may need to move sections between welding, coating, assembly, storage, and launch areas. Self-propelled movement can help crews work through busy production spaces without adding a separate towing vehicle.
Machinery and Plant Relocation
Eco transporters can support machinery moves, production-line changes, and recurring transfers of large equipment inside an industrial site. Cometto also lists plant relocation and industrial rental services among the Eco range’s areas of activity.
When Eco Is a Better Fit Than Cometto MSPE
Eco and MSPE equipment can both move heavy industrial loads, but each system is built around a different level of modular complexity.
Choose Eco for Compact, Recurring In-Plant Transport
The Eco1000 may be a good fit when the operation needs:
- An integrated PPU
- A compact, self-contained transporter
- A long usable loading platform
- Repeated moves along established plant routes
- A 2-, 4-, or 6-axle Eco configuration
- A combined arrangement using up to four units
- Combined payload capacity up to 1,500 tons
These features make Eco worth considering for steel plants, precast facilities, shipyards, power-equipment manufacturers, fabrication shops, and other operations that move large components as part of regular production.
Choose MSPE for Larger or More Complex Modular Combinations
Cometto’s MSPE range includes 48-, 60-, and 70-ton-per-axle-line families. The product line is built around interoperable module families with different dimensions, payload ratings, and bending moments.
MSPE may suit a project that requires:
- A larger modular convoy
- Mixed module families
- More complex load geometry
- Higher per-axle-line capacity
- A broader range of coupling and configuration options
- A transport setup built for extreme project loads
Eco is often the more direct choice for compact in-plant work. MSPE provides more options when the transport arrangement becomes larger or more complex.
Contact Hale Trailer to compare Eco and MSPE equipment for your load.
See the Eco1000 in Action!
Request Cometto Eco1000 Pricing Today
Provide the following information when requesting a quote:
- Load weight and dimensions
- Center-of-gravity information
- Required support locations
- Facility or route drawings
- Floor or ground conditions
- Indoor or outdoor operating environment
- Preferred power type
- Expected number of moves
- Delivery location and timing
Call Hale Trailer or submit an inquiry to check Cometto Eco1000 pricing and availability.
Cometto Eco1000 FAQs
How much weight can a Cometto Eco1000 carry?
Combined Eco1000 configurations can support payloads up to 1,000 tons. Individual-unit capacity depends on axle count and configuration. Cometto has published examples of 174 tons for a 4-axle unit and 264 tons for a 6-axle unit.
Can multiple Eco1000 units work together?
Yes. Cometto states that up to four Eco units can be combined. The arrangement must be planned around load distribution, support points, synchronization, route conditions, and floor or ground capacity.
Should I choose a Cometto Eco or an MSPE transporter?
Choose Eco for compact, recurring in-plant work where an integrated PPU and self-contained platform are useful. Consider MSPE when a project needs a larger modular convoy, mixed module families, higher per-axle-line ratings, or more complex configurations.